WeldPrep Beam service
Look after WeldPrep Beam with practical daily and weekly checks, careful attention to consumables, and clear service info for smooth, safe bevel and edge prep.
See support and enquiry pack. Use our contact form.
Also see beam notes and projects.
Daily and weekly operator checks for WeldPrep Beam
Consistent operator checks are key for reliable WeldPrep Beam operation and cut quality. A daily routine prevents downtime and protects both people and the machine. Always use the correct PPE and follow laser safety procedures, as the Class 4 beam is a fire and eye hazard. Never bypass interlocks or defeats on guarding.
Before every shift, check the protective window under the cutting head for dirt, spatter or cracks. A dirty or damaged window degrades the beam and risks cracking, which can quickly lead to failed cuts or serious damage. Inspect the nozzle and lens for deposits and replace them if needed. Confirm local exhaust extraction is running and filters are not clogged. Verify coolant level and temperature in the chiller, and look for leaks or kinks in coolant lines. Extractor and chiller filters may need extra attention in Highveld dust or coastal humidity.
- Inspect protective window and lens daily
- Check nozzle for spatter and wear
- Verify chiller coolant level and temperature
- Test extraction airflow and check filters
- Confirm interlocks and emergency stops work
Scheduled service by the FibreLaser SA team
WeldPrep Beam benefits from scheduled preventative maintenance by our qualified technicians. We recommend a full service interval based on hours cut or at least every six months, tailored for your workshop volume and environment. This includes deep-cleaning optics, reviewing all electrical and safety systems, checking for wear on linear rails and bearings, and recalibrating the focus as needed.
Our team also updates software and checks the machine's compliance with the OHS Act and Radiation Control licence. Before your service appointment, back up job files and prepare a handover note with any specific issues or observed changes in performance. This helps us address small problems before they grow.
Consumables and spares to keep in stock
Keeping critical consumables on your shelf reduces lost time when small issues arise. For WeldPrep Beam, stock up on spare protective windows, nozzles, and lens cleaning swabs. Have a reserve of coolant specified by the source manufacturer, especially for winter on the Highveld or humid areas where chiller maintenance is more demanding.
Store replacement fume extraction and chiller filters, and make sure you have marking or calibration sheets if you use those features. Consumables should be kept clean and stored in dry, dust-free packaging to prevent contamination. Replace any component that shows signs of damage at the next opportunity.
- Protective windows (spares)
- Nozzles and lens cleaning swabs
- Chiller coolant (as specified)
- Extraction and chiller filters
- Calibration or marking sheets
Support details to include
When something goes wrong with your WeldPrep Beam, send us a message using our contact form. So we can trace the right unit, include the system name, serial number, and clear photos of the area or part in question. Describe the material, thickness, and what changed leading up to the fault.
If possible, attach a short video or image of the cut or error. Let us know if the problem is intermittent, and list any recent changes in settings, gas supply, or site wiring. Gas supply, wiring changes and fault timing guide our advice or a site visit.
- System name and serial number
- Photos or video of fault area
- Material type and thickness
- Description of what changed
- Recent maintenance or setting changes
What our Fibre Laser customers say
Verified Google reviews