TubeCut R8 specs
TubeCut R8 brings rotary tube cutting to fabricators working with round, square, rectangular and oval sections, with clear support for frames, rails and chassis parts.
| Axis | Rotary tube |
|---|---|
| Profiles | RHS / pipe / oval |
| Best for | Frames and rails |
| Clamp | Soft jaw kit |
| Nest | Tube nest cues |
| Support | Sunnyrock HQ |
Use our contact form to request a pack for your setup.
Also see beam notes and projects.
How TubeCut R8 specs shape real workshop results
A rotary tube axis means TubeCut R8 can cut along and around pipes, RHS, and oval tubes, not only flat sheet. This opens up options for chassis work, trusses, and rail frames, where notching or mitring tubes by hand would be slow or inconsistent.
The soft jaw clamp kit grips profiles firmly without deforming thin wall tube, which matters for repeatable cuts and avoiding costly scrap. Tube nest cues help you lay out jobs to use up tube stock efficiently, supporting both large production runs and one-off prototypes.
What the specs do not tell you until you see your own parts cut
On paper, most rotary tube systems look similar. The real proof comes when you run your own material and profile types. Wall thickness, seam position and surface finish can all affect cut quality and fixture stability.
We recommend booking a first-article review at Sunnyrock HQ. Bring sample tube, your trickiest profile, or a welded assembly if possible. This shows you how TubeCut R8 handles your joint prep, coping, or slotting needs before you commit.
Key site and utility points to plan for
TubeCut R8 requires practical planning before installation. Check these points early with your team and electrician:
The system needs a stable, level floor and enough clearance for tube loading and unloading. Dust is common in South African yards, so allow for regular cleaning of optics and the machine bed.
- 400 V three-phase 50 Hz supply with correct circuit protection
- Certified fixed wiring and CoC under SANS 10142-1
- Local exhaust extraction for metal fume and dust
- Safe gas supply and cylinder storage (see SANS 10019)
- Access for tube raw material up to full bed length
Questions to ask before comparing systems and quotes
Ask whether the system can handle all the shapes and wall thicknesses you run, especially if you use both thin and thick profiles. Find out how quick and simple it is to change clamps or jaws for a different tube type.
Check what comes with the TubeCut R8: does it include nesting for tubes, starter clamp kits and local support? Ask about first-article support at Sunnyrock and ongoing training for your team.
- What profiles and wall thicknesses are supported?
- How is the tube clamped and aligned for accuracy?
- Can my team get first-article testing on our own materials?
- Is on-site and remote support included?
- What are the ongoing maintenance requirements?
What our Fibre Laser customers say
Verified Google reviews